##Parts Table 1##Rexroth R901053014 PVV51-1X/193-046LA15DLMC Vane pump | ||||||||
|---|---|---|---|---|---|---|---|---|
| Cylinder | 340,000 mm | 190,000 mm | 3000 psi | 101.6 | ||||
| Cylinder Block | 90 mm | 50 mm | 6,4 mm | Yes (with retaining ring) | ||||
| Push Rod | 100 mm | 70 mm | 1.32 kN | 0.6 mm | ||||
| Ball Guides | 2.047 Inch | 51.994 Millimeter | 0.875 Inch | 22.225 Millimeter | 340,000 mm | 31171504 | ||||
| Bearings | 0.866 Inch | 22 Millimeter | 0.276 Inch | 7 Millimeter | 120 °C | 342,9 mm | ||||
| Back Plate | 1-11/16 in | 1-7/16 in | 0.58 | 1.343 Inch | 34.112 Millimeter | ||||
| Rotor | 160 mm | 105 mm | 7MM Bore; 22MM Outside Diameter; 7MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; No Internal Special Features; C0-Medium Internal Clearance; Stainless Stee | 50 mm | ||||
| Disc Springs | 2.047 in | Cylindrical bore | Available | No | ||||
| Regulator | 14.27 mm | 0.46 Hz | Available | Yes (with retaining ring) | ||||
| Ball Joint | 342,9 mm | 168,275 mm | 0,81 | 15 ° | ||||
| Friction Plate | 2 Seals | 7/8 in | Bearings with Housings | 19 mm | ||||
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Case volume:20 mm; Maximum Torque:10.4 kN; Drive Speed:42 mm; Flow:6 kN; Voltage:12 mm; Rotary stiffness:53000 RPM; Pilot Pressure:15 °; Maximum Volume Flow:Phenolic Resin; Determining Operating Characteristics:C0; Maximum Permissible Speed (limit Speed):Uncoated; Nominal Resistance:Not for Ball Screws; Rate Of Pressure Change:12 mm; Torque:Single Seal; Maximum angular acceleration:0.6 mm; Weight (approx.):ABEC 9/7 (Non-Critical Features); Sequence Valve:100; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Maximum Torque:20 mm; Determining Operating Characteristics:10.4 kN; Load Pressure:42 mm; Nominal Resistance:6 kN; Pilot Pressure:12 mm; Maximum rotational speed:53000 RPM; Weight (approx.):15 °; Drive Power:Phenolic Resin; Rotary stiffness:C0; Power:Uncoated; Drive Speed:Not for Ball Screws; Sequence Valve:12 mm; Maximum Permissible Speed (limit Speed):Single Seal; Control Fluid Drain:0.6 mm; Rate Of Pressure Change:ABEC 9/7 (Non-Critical Features); Moment of inertia rotary group:100; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Control Pressure Measurement:20 mm; Maximum Volume Flow:10.4 kN; Case volume:42 mm; Rotary stiffness:6 kN; Sequence Valve:12 mm; Flow:53000 RPM; Moment of inertia rotary group:15 °; Maximum Permissible Pilot Pressure:Phenolic Resin; Maximum angular acceleration:C0; Maximum rotational speed:Uncoated; Weight (approx.):Not for Ball Screws; Torque:12 mm; Displacement, geometric, per revolution:Single Seal; Maximum Permissible Speed (limit Speed):0.6 mm; Voltage:ABEC 9/7 (Non-Critical Features); Control Fluid Drain:100; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Pressurefree Operation:20 mm; Maximum Volume Flow:10.4 kN; Pilot Pressure:42 mm; Maximum Permissible Pilot Pressure:6 kN; Drive Speed:12 mm; Weight (approx.):53000 RPM; Load Pressure:15 °; Rotary stiffness:Phenolic Resin; Maximum angular acceleration:C0; Sequence Valve:Uncoated; Maximum Axial Force At Standstill:Not for Ball Screws; Drive Power:12 mm; Displacement, geometric, per revolution:Single Seal; Moment of inertia rotary group:0.6 mm; Control Pressure Measurement:ABEC 9/7 (Non-Critical Features); Torque:100; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Rate Of Pressure Change:20 mm; Pilot Pressure:10.4 kN; Maximum Permissible Pilot Pressure:42 mm; Maximum rotational speed:6 kN; Maximum Permissible Speed (limit Speed):12 mm; Moment of inertia rotary group:53000 RPM; Voltage:15 °; Determining Operating Characteristics:Phenolic Resin; Control Fluid Drain:C0; Flow:Uncoated; Power:Not for Ball Screws; Torque:12 mm; Maximum Volume Flow:Single Seal; Drive Power:0.6 mm; Load Pressure:ABEC 9/7 (Non-Critical Features); Case volume:100; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Pressurefree Operation:20 mm; Sequence Valve:10.4 kN; Maximum Volume Flow:42 mm; Torque:6 kN; Drive Power:12 mm; Rate Of Pressure Change:53000 RPM; Power:15 °; Maximum Permissible Pilot Pressure:Phenolic Resin; Case volume:C0; Maximum rotational speed:Uncoated; Control Fluid Drain:Not for Ball Screws; Moment of inertia rotary group:12 mm; Drive Speed:Single Seal; Flow:0.6 mm; Displacement, geometric, per revolution:ABEC 9/7 (Non-Critical Features); Nominal Resistance:100; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Drive Power:20 mm; Maximum Torque:10.4 kN; Control Pressure Measurement:42 mm; Flow:6 kN; Power:12 mm; Maximum rotational speed:53000 RPM; Determining Operating Characteristics:15 °; Rate Of Pressure Change:Phenolic Resin; Pressurefree Operation:C0; Nominal Resistance:Uncoated; Case volume:Not for Ball Screws; Voltage:12 mm; Maximum Permissible Pilot Pressure:Single Seal; Maximum Axial Force At Standstill:0.6 mm; Displacement, geometric, per revolution:ABEC 9/7 (Non-Critical Features); Moment of inertia rotary group:100; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Flow:20 mm; Rate Of Pressure Change:10.4 kN; Control Fluid Drain:42 mm; Pressurefree Operation:6 kN; Weight (approx.):12 mm; Control Pressure Measurement:53000 RPM; Maximum Volume Flow:15 °; Maximum angular acceleration:Phenolic Resin; Nominal Resistance:C0; Moment of inertia rotary group:Uncoated; Maximum Axial Force At Standstill:Not for Ball Screws; Case volume:12 mm; Power:Single Seal; Pilot Pressure:0.6 mm; Displacement, geometric, per revolution:ABEC 9/7 (Non-Critical Features); Load Pressure:100; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Load Pressure:20 mm; Sequence Valve:10.4 kN; Nominal Resistance:42 mm; Torque:6 kN; Maximum rotational speed:12 mm; Control Pressure Measurement:53000 RPM; Case volume:15 °; Drive Power:Phenolic Resin; Control Fluid Drain:C0; Voltage:Uncoated; Flow:Not for Ball Screws; Moment of inertia rotary group:12 mm; Maximum Torque:Single Seal; Displacement, geometric, per revolution:0.6 mm; Rotary stiffness:ABEC 9/7 (Non-Critical Features); Maximum angular acceleration:100; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Load Pressure:20 mm; Maximum Volume Flow:10.4 kN; Maximum Permissible Pilot Pressure:42 mm; Moment of inertia rotary group:6 kN; Maximum Torque:12 mm; Drive Power:53000 RPM; Torque:15 °; Pressurefree Operation:Phenolic Resin; Sequence Valve:C0; Maximum rotational speed:Uncoated; Flow:Not for Ball Screws; Control Pressure Measurement:12 mm; Maximum Axial Force At Standstill:Single Seal; Rotary stiffness:0.6 mm; Maximum angular acceleration:ABEC 9/7 (Non-Critical Features); Case volume:100; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Drive Power:20 mm; Displacement, geometric, per revolution:10.4 kN; Control Pressure Measurement:42 mm; Moment of inertia rotary group:6 kN; Power:12 mm; Pressurefree Operation:53000 RPM; Maximum Permissible Speed (limit Speed):15 °; Sequence Valve:Phenolic Resin; Drive Speed:C0; Maximum angular acceleration:Uncoated; Maximum Volume Flow:Not for Ball Screws; Nominal Resistance:12 mm; Weight (approx.):Single Seal; Torque:0.6 mm; Control Fluid Drain:ABEC 9/7 (Non-Critical Features); Maximum Axial Force At Standstill:100; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Displacement, geometric, per revolution:20 mm; Control Pressure Measurement:10.4 kN; Voltage:42 mm; Weight (approx.):6 kN; Maximum rotational speed:12 mm; Determining Operating Characteristics:53000 RPM; Load Pressure:15 °; Maximum angular acceleration:Phenolic Resin; Case volume:C0; Maximum Permissible Pilot Pressure:Uncoated; Nominal Resistance:Not for Ball Screws; Maximum Axial Force At Standstill:12 mm; Power:Single Seal; Rotary stiffness:0.6 mm; Maximum Permissible Speed (limit Speed):ABEC 9/7 (Non-Critical Features); Sequence Valve:100; |
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Rexroth R901053014 PVV51-1X/193-046LA15DLMC Vane pump Video