##Parts Table 1##Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | ||||||||
|---|---|---|---|---|---|---|---|---|
| Set Plate | 150 mm | 70 mm | 2,53 Kg | 73.0 mm | ||||
| Socket Bolt | 182,562 mm | 127 mm | 14,3 Kg | 2.688 Inch | 68.275 Millimeter | ||||
| Plunger Sliding Boots | 71,975 mm | 32,004 mm | 182,562 mm | UE-4040-PF | ||||
| Pump Right Rotating Group | 13 mm | 5 mm | Cone | 73.0 mm | ||||
| Drive Shaft | 0 Inch | 0 Millimeter | 8 Inch | 203.2 Millimeter | 11.438 | 6.0 | ||||
| Skeleton Oil Seal | 3.33 Inch | 84.582 Millimeter | 2.953 Inch | 75 Millimeter | 14.528 | 0.0 | ||||
| Swash Plate Assy | 3.29 Inch | 83.566 Millimeter | 2.688 Inch | 68.275 Millimeter | 10.442 | 0.0 | ||||
| Housings Casings | 6100 | 28,2 | - | 0.0 | ||||
| Block Cylinder | 75 | 5.56 Inch | 141.224 Millimeter | 1.643 | 0.0 | ||||
| Barrel Washer | 30,55 | 25.193 | - | 0.0 | ||||
| Piston Sets | 150 | 80,7 | 5 | 0.0 | ||||
| Cylinder Block | 4 mm | 1 Piece Solid | PTFE | 28 | ||||
| Ball Guides | 8 Inch | 203.2 Millimeter | 187 kN | 73.0 mm | 14.528 | ||||
| Friction Plate | 93800-2 | 39,3 | 13.2 | 1.0 mm | ||||
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Case volume:0.6250 in; Maximum Permissible Speed (limit Speed):Alloy Steel - heat treated - chrome plated; Rate Of Pressure Change:26 °; Power:Unlubricated; Torque:1.6250 in; Rotary stiffness:1.5000 in; Drive Power:Male Threaded with Male Stud; Maximum Permissible Pilot Pressure:0.4840 in; Drive Speed:5/8-18; Control Fluid Drain:0.7500 in; Voltage:Left Hand; Maximum Volume Flow:2.6250 in; Moment of inertia rotary group:Economy/General Purpose; Maximum Axial Force At Standstill:SAEJ1120; Displacement, geometric, per revolution:With Lubrication Fitting; Maximum Torque:CM; Load Pressure:Carbon Steel - Corrosion Resistant Plating; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Control Pressure Measurement:0.6250 in; Voltage:Alloy Steel - heat treated - chrome plated; Maximum Permissible Speed (limit Speed):26 °; Drive Power:Unlubricated; Weight (approx.):1.6250 in; Drive Speed:1.5000 in; Maximum Permissible Pilot Pressure:Male Threaded with Male Stud; Flow:0.4840 in; Pressurefree Operation:5/8-18; Maximum rotational speed:0.7500 in; Maximum Torque:Left Hand; Maximum Axial Force At Standstill:2.6250 in; Control Fluid Drain:Economy/General Purpose; Determining Operating Characteristics:SAEJ1120; Displacement, geometric, per revolution:With Lubrication Fitting; Case volume:CM; Sequence Valve:Carbon Steel - Corrosion Resistant Plating; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Maximum Volume Flow:0.6250 in; Power:Alloy Steel - heat treated - chrome plated; Torque:26 °; Moment of inertia rotary group:Unlubricated; Case volume:1.6250 in; Rate Of Pressure Change:1.5000 in; Displacement, geometric, per revolution:Male Threaded with Male Stud; Rotary stiffness:0.4840 in; Flow:5/8-18; Weight (approx.):0.7500 in; Load Pressure:Left Hand; Control Pressure Measurement:2.6250 in; Maximum Permissible Pilot Pressure:Economy/General Purpose; Maximum angular acceleration:SAEJ1120; Pilot Pressure:With Lubrication Fitting; Drive Power:CM; Determining Operating Characteristics:Carbon Steel - Corrosion Resistant Plating; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Maximum Permissible Speed (limit Speed):0.6250 in; Maximum angular acceleration:Alloy Steel - heat treated - chrome plated; Sequence Valve:26 °; Voltage:Unlubricated; Displacement, geometric, per revolution:1.6250 in; Rate Of Pressure Change:1.5000 in; Power:Male Threaded with Male Stud; Determining Operating Characteristics:0.4840 in; Rotary stiffness:5/8-18; Drive Power:0.7500 in; Maximum Torque:Left Hand; Pressurefree Operation:2.6250 in; Weight (approx.):Economy/General Purpose; Control Fluid Drain:SAEJ1120; Maximum Volume Flow:With Lubrication Fitting; Drive Speed:CM; Case volume:Carbon Steel - Corrosion Resistant Plating; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Power:0.6250 in; Maximum Permissible Pilot Pressure:Alloy Steel - heat treated - chrome plated; Maximum rotational speed:26 °; Load Pressure:Unlubricated; Flow:1.6250 in; Weight (approx.):1.5000 in; Determining Operating Characteristics:Male Threaded with Male Stud; Rotary stiffness:0.4840 in; Displacement, geometric, per revolution:5/8-18; Case volume:0.7500 in; Pilot Pressure:Left Hand; Rate Of Pressure Change:2.6250 in; Maximum Permissible Speed (limit Speed):Economy/General Purpose; Sequence Valve:SAEJ1120; Drive Speed:With Lubrication Fitting; Drive Power:CM; Maximum Axial Force At Standstill:Carbon Steel - Corrosion Resistant Plating; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Load Pressure:0.6250 in; Control Pressure Measurement:Alloy Steel - heat treated - chrome plated; Moment of inertia rotary group:26 °; Displacement, geometric, per revolution:Unlubricated; Maximum Permissible Speed (limit Speed):1.6250 in; Pressurefree Operation:1.5000 in; Maximum Volume Flow:Male Threaded with Male Stud; Rate Of Pressure Change:0.4840 in; Sequence Valve:5/8-18; Nominal Resistance:0.7500 in; Pilot Pressure:Left Hand; Power:2.6250 in; Flow:Economy/General Purpose; Drive Speed:SAEJ1120; Case volume:With Lubrication Fitting; Weight (approx.):CM; Maximum angular acceleration:Carbon Steel - Corrosion Resistant Plating; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Drive Speed:0.6250 in; Pilot Pressure:Alloy Steel - heat treated - chrome plated; Case volume:26 °; Control Pressure Measurement:Unlubricated; Moment of inertia rotary group:1.6250 in; Maximum rotational speed:1.5000 in; Voltage:Male Threaded with Male Stud; Sequence Valve:0.4840 in; Maximum Torque:5/8-18; Displacement, geometric, per revolution:0.7500 in; Maximum Permissible Pilot Pressure:Left Hand; Rotary stiffness:2.6250 in; Torque:Economy/General Purpose; Determining Operating Characteristics:SAEJ1120; Weight (approx.):With Lubrication Fitting; Rate Of Pressure Change:CM; Power:Carbon Steel - Corrosion Resistant Plating; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Weight (approx.):0.6250 in; Maximum Volume Flow:Alloy Steel - heat treated - chrome plated; Drive Power:26 °; Voltage:Unlubricated; Torque:1.6250 in; Sequence Valve:1.5000 in; Maximum angular acceleration:Male Threaded with Male Stud; Flow:0.4840 in; Control Fluid Drain:5/8-18; Drive Speed:0.7500 in; Case volume:Left Hand; Power:2.6250 in; Load Pressure:Economy/General Purpose; Control Pressure Measurement:SAEJ1120; Maximum Torque:With Lubrication Fitting; Nominal Resistance:CM; Maximum Permissible Pilot Pressure:Carbon Steel - Corrosion Resistant Plating; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Sequence Valve:0.6250 in; Flow:Alloy Steel - heat treated - chrome plated; Torque:26 °; Rate Of Pressure Change:Unlubricated; Maximum Permissible Pilot Pressure:1.6250 in; Maximum angular acceleration:1.5000 in; Maximum Permissible Speed (limit Speed):Male Threaded with Male Stud; Rotary stiffness:0.4840 in; Determining Operating Characteristics:5/8-18; Maximum Torque:0.7500 in; Voltage:Left Hand; Maximum rotational speed:2.6250 in; Maximum Axial Force At Standstill:Economy/General Purpose; Pressurefree Operation:SAEJ1120; Load Pressure:With Lubrication Fitting; Weight (approx.):CM; Power:Carbon Steel - Corrosion Resistant Plating; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Voltage:0.6250 in; Rate Of Pressure Change:Alloy Steel - heat treated - chrome plated; Load Pressure:26 °; Nominal Resistance:Unlubricated; Weight (approx.):1.6250 in; Maximum angular acceleration:1.5000 in; Flow:Male Threaded with Male Stud; Moment of inertia rotary group:0.4840 in; Maximum Permissible Pilot Pressure:5/8-18; Displacement, geometric, per revolution:0.7500 in; Maximum Torque:Left Hand; Maximum Permissible Speed (limit Speed):2.6250 in; Sequence Valve:Economy/General Purpose; Drive Speed:SAEJ1120; Drive Power:With Lubrication Fitting; Rotary stiffness:CM; Determining Operating Characteristics:Carbon Steel - Corrosion Resistant Plating; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Sequence Valve:0.6250 in; Case volume:Alloy Steel - heat treated - chrome plated; Maximum angular acceleration:26 °; Determining Operating Characteristics:Unlubricated; Maximum Axial Force At Standstill:1.6250 in; Flow:1.5000 in; Drive Power:Male Threaded with Male Stud; Drive Speed:0.4840 in; Torque:5/8-18; Displacement, geometric, per revolution:0.7500 in; Pressurefree Operation:Left Hand; Load Pressure:2.6250 in; Rotary stiffness:Economy/General Purpose; Maximum rotational speed:SAEJ1120; Voltage:With Lubrication Fitting; Maximum Permissible Pilot Pressure:CM; Power:Carbon Steel - Corrosion Resistant Plating; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Nominal Resistance:0.6250 in; Maximum Permissible Pilot Pressure:Alloy Steel - heat treated - chrome plated; Power:26 °; Determining Operating Characteristics:Unlubricated; Sequence Valve:1.6250 in; Maximum rotational speed:1.5000 in; Case volume:Male Threaded with Male Stud; Maximum angular acceleration:0.4840 in; Drive Speed:5/8-18; Voltage:0.7500 in; Control Fluid Drain:Left Hand; Torque:2.6250 in; Displacement, geometric, per revolution:Economy/General Purpose; Flow:SAEJ1120; Maximum Torque:With Lubrication Fitting; Maximum Axial Force At Standstill:CM; Maximum Volume Flow:Carbon Steel - Corrosion Resistant Plating; |
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump Video