##Parts Table 1##Rexroth R901110909 PVV21-1X/040-018RB15UDMB Vane pump | ||||||||
|---|---|---|---|---|---|---|---|---|
| Snap Ring | 75 mm | 105 mm | 24,4 kN | 16 mm | ||||
| Piston Sets | 0 Inch | 0 Millimeter | 5 Inch | 127 Millimeter | 4,3 mm | 1.625 Inch | 41.275 Millimeter | ||||
| Bearing Plate | 98,425 mm | 85 mm | 85 mm | 30x55x19 | ||||
| Set Plate | - | 500 | 9 mm | 68,1 | ||||
| Set Plate | 110mm | 200mm | 10.578 | 53mm | ||||
| Housings Casings | 85 mm | 180 mm | 49 mm | 60 mm | ||||
| Rotor | C_R_HDS2 | 2010 kN | 36 mm | 1.625 Inch | 41.275 Millimeter | ||||
| Drive Shaft | 98,425 mm | 158,75 mm | 75,8 mm | 19 | ||||
| Ball Guide | 240 mm | 360 mm | 92 mm | 92 mm | ||||
| Shafts | 140 mm | 190 mm | 24 mm | 24 mm | ||||
| Swash Plate Assy | 30 mm | 55 mm | 19 mm | 19 mm | ||||
| Barrel Washer | 1.211 | 63,5 mm | 140 | 114 mm | ||||
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Maximum Permissible Pilot Pressure:2.5000 in; Flow:Hex; Maximum Volume Flow:1.5000 in; Pilot Pressure:1-14; Voltage:1.0000 in; Nominal Resistance:13200 lbf; Control Pressure Measurement:2.2500 in; Torque:26600 lbf; Weight (approx.):Crowned; Pressurefree Operation:1400 RPM; Maximum Axial Force At Standstill:Chrome Steel; Case volume:Inner Ring; Drive Power:Needle Rollers; Load Pressure:Oxide; Determining Operating Characteristics:Sealed; Drive Speed:ANSI/ABMA Std. 18.2; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Maximum Axial Force At Standstill:2.5000 in; Case volume:Hex; Drive Power:1.5000 in; Load Pressure:1-14; Voltage:1.0000 in; Maximum Permissible Pilot Pressure:13200 lbf; Weight (approx.):2.2500 in; Maximum Permissible Speed (limit Speed):26600 lbf; Maximum rotational speed:Crowned; Nominal Resistance:1400 RPM; Sequence Valve:Chrome Steel; Torque:Inner Ring; Rotary stiffness:Needle Rollers; Moment of inertia rotary group:Oxide; Pilot Pressure:Sealed; Maximum angular acceleration:ANSI/ABMA Std. 18.2; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Case volume:2.5000 in; Rotary stiffness:Hex; Control Fluid Drain:1.5000 in; Maximum Volume Flow:1-14; Maximum Axial Force At Standstill:1.0000 in; Pressurefree Operation:13200 lbf; Load Pressure:2.2500 in; Weight (approx.):26600 lbf; Determining Operating Characteristics:Crowned; Rate Of Pressure Change:1400 RPM; Pilot Pressure:Chrome Steel; Flow:Inner Ring; Sequence Valve:Needle Rollers; Voltage:Oxide; Nominal Resistance:Sealed; Drive Speed:ANSI/ABMA Std. 18.2; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Control Fluid Drain:2.5000 in; Control Pressure Measurement:Hex; Maximum Permissible Speed (limit Speed):1.5000 in; Displacement, geometric, per revolution:1-14; Case volume:1.0000 in; Voltage:13200 lbf; Rate Of Pressure Change:2.2500 in; Rotary stiffness:26600 lbf; Determining Operating Characteristics:Crowned; Maximum Axial Force At Standstill:1400 RPM; Nominal Resistance:Chrome Steel; Flow:Inner Ring; Drive Power:Needle Rollers; Power:Oxide; Moment of inertia rotary group:Sealed; Maximum Torque:ANSI/ABMA Std. 18.2; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Torque:2.5000 in; Rotary stiffness:Hex; Maximum rotational speed:1.5000 in; Load Pressure:1-14; Moment of inertia rotary group:1.0000 in; Determining Operating Characteristics:13200 lbf; Drive Speed:2.2500 in; Maximum Volume Flow:26600 lbf; Weight (approx.):Crowned; Flow:1400 RPM; Pilot Pressure:Chrome Steel; Maximum Torque:Inner Ring; Control Fluid Drain:Needle Rollers; Rate Of Pressure Change:Oxide; Drive Power:Sealed; Maximum Permissible Pilot Pressure:ANSI/ABMA Std. 18.2; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Weight (approx.):2.5000 in; Drive Power:Hex; Maximum Permissible Speed (limit Speed):1.5000 in; Power:1-14; Pressurefree Operation:1.0000 in; Control Fluid Drain:13200 lbf; Drive Speed:2.2500 in; Rotary stiffness:26600 lbf; Maximum Permissible Pilot Pressure:Crowned; Determining Operating Characteristics:1400 RPM; Case volume:Chrome Steel; Maximum Axial Force At Standstill:Inner Ring; Maximum rotational speed:Needle Rollers; Maximum Torque:Oxide; Torque:Sealed; Load Pressure:ANSI/ABMA Std. 18.2; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Rate Of Pressure Change:2.5000 in; Determining Operating Characteristics:Hex; Displacement, geometric, per revolution:1.5000 in; Maximum Axial Force At Standstill:1-14; Control Pressure Measurement:1.0000 in; Case volume:13200 lbf; Drive Speed:2.2500 in; Rotary stiffness:26600 lbf; Sequence Valve:Crowned; Voltage:1400 RPM; Torque:Chrome Steel; Maximum Permissible Pilot Pressure:Inner Ring; Pressurefree Operation:Needle Rollers; Moment of inertia rotary group:Oxide; Control Fluid Drain:Sealed; Load Pressure:ANSI/ABMA Std. 18.2; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Maximum rotational speed:2.5000 in; Rotary stiffness:Hex; Maximum Permissible Speed (limit Speed):1.5000 in; Power:1-14; Load Pressure:1.0000 in; Voltage:13200 lbf; Drive Speed:2.2500 in; Sequence Valve:26600 lbf; Case volume:Crowned; Weight (approx.):1400 RPM; Maximum Volume Flow:Chrome Steel; Maximum Torque:Inner Ring; Displacement, geometric, per revolution:Needle Rollers; Maximum Permissible Pilot Pressure:Oxide; Control Pressure Measurement:Sealed; Pressurefree Operation:ANSI/ABMA Std. 18.2; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Maximum Axial Force At Standstill:2.5000 in; Maximum Volume Flow:Hex; Nominal Resistance:1.5000 in; Determining Operating Characteristics:1-14; Sequence Valve:1.0000 in; Weight (approx.):13200 lbf; Rate Of Pressure Change:2.2500 in; Displacement, geometric, per revolution:26600 lbf; Pressurefree Operation:Crowned; Maximum angular acceleration:1400 RPM; Case volume:Chrome Steel; Flow:Inner Ring; Rotary stiffness:Needle Rollers; Maximum Torque:Oxide; Drive Power:Sealed; Torque:ANSI/ABMA Std. 18.2; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Case volume:2.5000 in; Maximum rotational speed:Hex; Load Pressure:1.5000 in; Rotary stiffness:1-14; Control Pressure Measurement:1.0000 in; Maximum angular acceleration:13200 lbf; Sequence Valve:2.2500 in; Maximum Permissible Speed (limit Speed):26600 lbf; Maximum Volume Flow:Crowned; Maximum Torque:1400 RPM; Nominal Resistance:Chrome Steel; Drive Speed:Inner Ring; Control Fluid Drain:Needle Rollers; Pressurefree Operation:Oxide; Weight (approx.):Sealed; Determining Operating Characteristics:ANSI/ABMA Std. 18.2; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Rate Of Pressure Change:2.5000 in; Maximum rotational speed:Hex; Rotary stiffness:1.5000 in; Moment of inertia rotary group:1-14; Sequence Valve:1.0000 in; Maximum Volume Flow:13200 lbf; Nominal Resistance:2.2500 in; Maximum angular acceleration:26600 lbf; Power:Crowned; Determining Operating Characteristics:1400 RPM; Torque:Chrome Steel; Maximum Axial Force At Standstill:Inner Ring; Voltage:Needle Rollers; Weight (approx.):Oxide; Pressurefree Operation:Sealed; Flow:ANSI/ABMA Std. 18.2; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Nominal Resistance:2.5000 in; Sequence Valve:Hex; Voltage:1.5000 in; Drive Speed:1-14; Torque:1.0000 in; Load Pressure:13200 lbf; Pilot Pressure:2.2500 in; Flow:26600 lbf; Maximum Volume Flow:Crowned; Maximum angular acceleration:1400 RPM; Control Pressure Measurement:Chrome Steel; Maximum rotational speed:Inner Ring; Maximum Torque:Needle Rollers; Weight (approx.):Oxide; Maximum Axial Force At Standstill:Sealed; Displacement, geometric, per revolution:ANSI/ABMA Std. 18.2; |
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Rexroth R901110909 PVV21-1X/040-018RB15UDMB Vane pump Video