##Parts Table 1##Rexroth PVV52-1X/193-040RB15URMC Vane pump | ||||||||
|---|---|---|---|---|---|---|---|---|
| Bearing Plate | 127 mm | 60,325 mm | 1 Shaft Dia | 18.6 kN | ||||
| Block Springs | 0.252 Inch | 6.401 Millimeter | 0.189 Inch | 4.801 Millimeter | 0.0 | N/A | ||||
| Bushing Spring | 5.5118 in | 3080 RPM | 0.0 | N/A | ||||
| Piston Sets | 140 mm | 55 mm | 0.0 | N/A | ||||
| Separator | 23.622 Inch | 600 Millimeter | 14.173 Inch | 360 Millimeter | 0.0 | N/A | ||||
| Plunger Sliding Boots | 23.622 Inch | 600 Millimeter | 140 kN | 0.0 | N/A | ||||
| Set Plate | Small / Bore-Tite on OD / Without Inner Case | Metric | 0.0 | N/A | ||||
| Skeleton Oil Seal | Adapter Mount | 2-11/16 in | HM14 | SAE841 | ||||
| Regulator | 41,275 mm | 55x90x18 | http://www.fag.com | 60,325 | ||||
| Cylinder | 90 mm | 55 mm | 31171510 | C0-Medium | ||||
| Coil Spring | 126 mm | 0,043 Kg | 0.625 Inch / 15.875 Millimeter | http://www.fag.com | ||||
| The Ball Hinge Spring | 85.2 mm | 33,338 mm | Metric | N/A | ||||
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Maximum Torque:2.3750 in; Maximum Axial Force At Standstill:9000 lbf; Determining Operating Characteristics:6.5000 in; Displacement, geometric, per revolution:Contact with Flinger; Maximum angular acceleration:7.6406 in; Rotary stiffness:2.563 in; Torque:Round; Flow:5-33/64 in; Pilot Pressure:Medium Duty; Moment of inertia rotary group:1 in; Maximum Permissible Speed (limit Speed):Four-Bolt Piloted; Maximum Permissible Pilot Pressure:1/2; Rate Of Pressure Change:Cast Iron; Nominal Resistance:Lubrication Fitting; Sequence Valve:Set Screw; Weight (approx.):UCFCX00; Load Pressure:12900 lbf; Drive Power:UCX12-38; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Moment of inertia rotary group:2.3750 in; Maximum rotational speed:9000 lbf; Flow:6.5000 in; Torque:Contact with Flinger; Voltage:7.6406 in; Rotary stiffness:2.563 in; Pressurefree Operation:Round; Rate Of Pressure Change:5-33/64 in; Maximum angular acceleration:Medium Duty; Sequence Valve:1 in; Control Fluid Drain:Four-Bolt Piloted; Power:1/2; Pilot Pressure:Cast Iron; Weight (approx.):Lubrication Fitting; Maximum Torque:Set Screw; Displacement, geometric, per revolution:UCFCX00; Maximum Permissible Speed (limit Speed):12900 lbf; Drive Power:UCX12-38; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Case volume:2.3750 in; Displacement, geometric, per revolution:9000 lbf; Drive Power:6.5000 in; Voltage:Contact with Flinger; Control Pressure Measurement:7.6406 in; Rotary stiffness:2.563 in; Weight (approx.):Round; Pilot Pressure:5-33/64 in; Maximum Volume Flow:Medium Duty; Maximum rotational speed:1 in; Power:Four-Bolt Piloted; Pressurefree Operation:1/2; Nominal Resistance:Cast Iron; Maximum Permissible Speed (limit Speed):Lubrication Fitting; Drive Speed:Set Screw; Sequence Valve:UCFCX00; Rate Of Pressure Change:12900 lbf; Flow:UCX12-38; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Moment of inertia rotary group:2.3750 in; Drive Speed:9000 lbf; Control Fluid Drain:6.5000 in; Flow:Contact with Flinger; Drive Power:7.6406 in; Sequence Valve:2.563 in; Rate Of Pressure Change:Round; Maximum Permissible Speed (limit Speed):5-33/64 in; Maximum Volume Flow:Medium Duty; Maximum angular acceleration:1 in; Maximum Permissible Pilot Pressure:Four-Bolt Piloted; Maximum Axial Force At Standstill:1/2; Weight (approx.):Cast Iron; Maximum Torque:Lubrication Fitting; Power:Set Screw; Torque:UCFCX00; Rotary stiffness:12900 lbf; Maximum rotational speed:UCX12-38; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Pilot Pressure:2.3750 in; Maximum angular acceleration:9000 lbf; Nominal Resistance:6.5000 in; Control Pressure Measurement:Contact with Flinger; Flow:7.6406 in; Weight (approx.):2.563 in; Maximum Torque:Round; Maximum Volume Flow:5-33/64 in; Drive Power:Medium Duty; Maximum Axial Force At Standstill:1 in; Maximum Permissible Pilot Pressure:Four-Bolt Piloted; Case volume:1/2; Drive Speed:Cast Iron; Determining Operating Characteristics:Lubrication Fitting; Control Fluid Drain:Set Screw; Rate Of Pressure Change:UCFCX00; Maximum rotational speed:12900 lbf; Moment of inertia rotary group:UCX12-38; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Control Fluid Drain:2.3750 in; Maximum Permissible Pilot Pressure:9000 lbf; Drive Speed:6.5000 in; Control Pressure Measurement:Contact with Flinger; Flow:7.6406 in; Maximum Volume Flow:2.563 in; Load Pressure:Round; Power:5-33/64 in; Moment of inertia rotary group:Medium Duty; Maximum Torque:1 in; Weight (approx.):Four-Bolt Piloted; Maximum Permissible Speed (limit Speed):1/2; Maximum Axial Force At Standstill:Cast Iron; Drive Power:Lubrication Fitting; Maximum rotational speed:Set Screw; Torque:UCFCX00; Maximum angular acceleration:12900 lbf; Rate Of Pressure Change:UCX12-38; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Displacement, geometric, per revolution:2.3750 in; Maximum Permissible Speed (limit Speed):9000 lbf; Maximum Axial Force At Standstill:6.5000 in; Nominal Resistance:Contact with Flinger; Rotary stiffness:7.6406 in; Power:2.563 in; Flow:Round; Rate Of Pressure Change:5-33/64 in; Control Pressure Measurement:Medium Duty; Drive Power:1 in; Maximum Volume Flow:Four-Bolt Piloted; Maximum rotational speed:1/2; Drive Speed:Cast Iron; Control Fluid Drain:Lubrication Fitting; Case volume:Set Screw; Voltage:UCFCX00; Sequence Valve:12900 lbf; Torque:UCX12-38; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Displacement, geometric, per revolution:2.3750 in; Voltage:9000 lbf; Load Pressure:6.5000 in; Drive Speed:Contact with Flinger; Pilot Pressure:7.6406 in; Maximum angular acceleration:2.563 in; Sequence Valve:Round; Case volume:5-33/64 in; Torque:Medium Duty; Maximum Torque:1 in; Pressurefree Operation:Four-Bolt Piloted; Power:1/2; Flow:Cast Iron; Maximum rotational speed:Lubrication Fitting; Drive Power:Set Screw; Determining Operating Characteristics:UCFCX00; Weight (approx.):12900 lbf; Maximum Volume Flow:UCX12-38; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Displacement, geometric, per revolution:2.3750 in; Torque:9000 lbf; Pilot Pressure:6.5000 in; Load Pressure:Contact with Flinger; Rotary stiffness:7.6406 in; Case volume:2.563 in; Pressurefree Operation:Round; Determining Operating Characteristics:5-33/64 in; Weight (approx.):Medium Duty; Flow:1 in; Rate Of Pressure Change:Four-Bolt Piloted; Nominal Resistance:1/2; Maximum Volume Flow:Cast Iron; Maximum Permissible Pilot Pressure:Lubrication Fitting; Drive Speed:Set Screw; Power:UCFCX00; Control Fluid Drain:12900 lbf; Maximum angular acceleration:UCX12-38; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Rotary stiffness:2.3750 in; Rate Of Pressure Change:9000 lbf; Flow:6.5000 in; Moment of inertia rotary group:Contact with Flinger; Drive Power:7.6406 in; Determining Operating Characteristics:2.563 in; Maximum Permissible Speed (limit Speed):Round; Maximum Permissible Pilot Pressure:5-33/64 in; Load Pressure:Medium Duty; Maximum rotational speed:1 in; Nominal Resistance:Four-Bolt Piloted; Control Fluid Drain:1/2; Drive Speed:Cast Iron; Pressurefree Operation:Lubrication Fitting; Displacement, geometric, per revolution:Set Screw; Case volume:UCFCX00; Maximum Volume Flow:12900 lbf; Torque:UCX12-38; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Moment of inertia rotary group:2.3750 in; Power:9000 lbf; Displacement, geometric, per revolution:6.5000 in; Maximum Axial Force At Standstill:Contact with Flinger; Drive Power:7.6406 in; Maximum Torque:2.563 in; Rate Of Pressure Change:Round; Weight (approx.):5-33/64 in; Load Pressure:Medium Duty; Maximum Permissible Speed (limit Speed):1 in; Pressurefree Operation:Four-Bolt Piloted; Maximum Permissible Pilot Pressure:1/2; Torque:Cast Iron; Maximum rotational speed:Lubrication Fitting; Maximum Volume Flow:Set Screw; Control Fluid Drain:UCFCX00; Control Pressure Measurement:12900 lbf; Voltage:UCX12-38; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Power:2.3750 in; Case volume:9000 lbf; Displacement, geometric, per revolution:6.5000 in; Drive Power:Contact with Flinger; Maximum Volume Flow:7.6406 in; Moment of inertia rotary group:2.563 in; Pilot Pressure:Round; Maximum rotational speed:5-33/64 in; Control Pressure Measurement:Medium Duty; Weight (approx.):1 in; Maximum Permissible Speed (limit Speed):Four-Bolt Piloted; Rotary stiffness:1/2; Nominal Resistance:Cast Iron; Drive Speed:Lubrication Fitting; Rate Of Pressure Change:Set Screw; Maximum Axial Force At Standstill:UCFCX00; Torque:12900 lbf; Maximum angular acceleration:UCX12-38; |
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Rexroth PVV52-1X/193-040RB15URMC Vane pump Video