##Parts Table 1##Rexroth PVV4-1X/122RA15DMB Vane pump | ||||||||
|---|---|---|---|---|---|---|---|---|
| Seal Kit For Hyd Pump | 72 mm | 30 mm | 59 kN | 0,37 Kg | ||||
| Shoe Piston | 78 | 70 | 40,5 kN | 0,099 Kg | ||||
| Back Plate | 215 mm | 100 mm | 380 kN | 8,57 Kg | ||||
| Rotor | 4.563 Inch | 115.9 Millimeter | 3.438 Inch | 87.325 Millimeter | HMSA10 | 10.901 | ||||
| Press Pin | 1 mm | 31.6 | 1 mm | 0.477 | ||||
| Pressure Plate | Steel and Rubber | 0.4375 in | 0.562 in | 0,099 Kg | ||||
| Swing | 100 mm | 55 mm | 30 | 0.780 kg | ||||
| Valve Plate | 90.000 mm | 40 mm | 131 kN | 30308U | ||||
| Cylinder Block | 215 mm | 120 mm | 40 mm | 0.0775 | ||||
| Cylinder Blocks | 0.70 Kg | 26800 N | 5300 r/min | KM | ||||
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Maximum angular acceleration:12 mm; Maximum Axial Force At Standstill:4.55 kN; Rotary stiffness:28 mm; Flow:2.5 kN; Rate Of Pressure Change:8 mm; Drive Power:75000 RPM; Voltage:25 °; Pilot Pressure:Phenolic Resin; Pressurefree Operation:C0; Case volume:Uncoated; Moment of inertia rotary group:Not for Ball Screws; Drive Speed:8 mm; Control Pressure Measurement:Double Sealed; Displacement, geometric, per revolution:0.3 mm; Torque:ABEC 9/7 (Non-Critical Features); Maximum rotational speed:100; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Voltage:12 mm; Drive Speed:4.55 kN; Displacement, geometric, per revolution:28 mm; Drive Power:2.5 kN; Rate Of Pressure Change:8 mm; Torque:75000 RPM; Sequence Valve:25 °; Case volume:Phenolic Resin; Determining Operating Characteristics:C0; Maximum Torque:Uncoated; Flow:Not for Ball Screws; Maximum Axial Force At Standstill:8 mm; Maximum Permissible Speed (limit Speed):Double Sealed; Pilot Pressure:0.3 mm; Maximum rotational speed:ABEC 9/7 (Non-Critical Features); Maximum Volume Flow:100; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Voltage:12 mm; Rotary stiffness:4.55 kN; Maximum Volume Flow:28 mm; Maximum Torque:2.5 kN; Power:8 mm; Pilot Pressure:75000 RPM; Displacement, geometric, per revolution:25 °; Weight (approx.):Phenolic Resin; Maximum Permissible Speed (limit Speed):C0; Maximum Permissible Pilot Pressure:Uncoated; Flow:Not for Ball Screws; Moment of inertia rotary group:8 mm; Load Pressure:Double Sealed; Torque:0.3 mm; Pressurefree Operation:ABEC 9/7 (Non-Critical Features); Maximum Axial Force At Standstill:100; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Weight (approx.):12 mm; Displacement, geometric, per revolution:4.55 kN; Rotary stiffness:28 mm; Flow:2.5 kN; Sequence Valve:8 mm; Maximum rotational speed:75000 RPM; Control Pressure Measurement:25 °; Determining Operating Characteristics:Phenolic Resin; Rate Of Pressure Change:C0; Maximum Axial Force At Standstill:Uncoated; Load Pressure:Not for Ball Screws; Pressurefree Operation:8 mm; Nominal Resistance:Double Sealed; Control Fluid Drain:0.3 mm; Maximum angular acceleration:ABEC 9/7 (Non-Critical Features); Maximum Torque:100; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Drive Speed:12 mm; Maximum rotational speed:4.55 kN; Flow:28 mm; Maximum Torque:2.5 kN; Load Pressure:8 mm; Maximum Axial Force At Standstill:75000 RPM; Displacement, geometric, per revolution:25 °; Determining Operating Characteristics:Phenolic Resin; Moment of inertia rotary group:C0; Maximum Volume Flow:Uncoated; Pilot Pressure:Not for Ball Screws; Drive Power:8 mm; Rate Of Pressure Change:Double Sealed; Control Fluid Drain:0.3 mm; Nominal Resistance:ABEC 9/7 (Non-Critical Features); Sequence Valve:100; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Torque:12 mm; Weight (approx.):4.55 kN; Pilot Pressure:28 mm; Sequence Valve:2.5 kN; Drive Power:8 mm; Control Fluid Drain:75000 RPM; Flow:25 °; Maximum Volume Flow:Phenolic Resin; Maximum Permissible Speed (limit Speed):C0; Moment of inertia rotary group:Uncoated; Power:Not for Ball Screws; Pressurefree Operation:8 mm; Rotary stiffness:Double Sealed; Determining Operating Characteristics:0.3 mm; Maximum Permissible Pilot Pressure:ABEC 9/7 (Non-Critical Features); Control Pressure Measurement:100; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Moment of inertia rotary group:12 mm; Flow:4.55 kN; Maximum Torque:28 mm; Load Pressure:2.5 kN; Drive Speed:8 mm; Maximum Permissible Speed (limit Speed):75000 RPM; Pilot Pressure:25 °; Maximum angular acceleration:Phenolic Resin; Control Pressure Measurement:C0; Nominal Resistance:Uncoated; Maximum Axial Force At Standstill:Not for Ball Screws; Maximum Volume Flow:8 mm; Maximum rotational speed:Double Sealed; Case volume:0.3 mm; Displacement, geometric, per revolution:ABEC 9/7 (Non-Critical Features); Rate Of Pressure Change:100; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Displacement, geometric, per revolution:12 mm; Control Pressure Measurement:4.55 kN; Maximum Axial Force At Standstill:28 mm; Maximum Volume Flow:2.5 kN; Case volume:8 mm; Load Pressure:75000 RPM; Sequence Valve:25 °; Flow:Phenolic Resin; Control Fluid Drain:C0; Moment of inertia rotary group:Uncoated; Rate Of Pressure Change:Not for Ball Screws; Maximum Permissible Pilot Pressure:8 mm; Weight (approx.):Double Sealed; Rotary stiffness:0.3 mm; Maximum Torque:ABEC 9/7 (Non-Critical Features); Power:100; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Pilot Pressure:12 mm; Power:4.55 kN; Case volume:28 mm; Determining Operating Characteristics:2.5 kN; Torque:8 mm; Flow:75000 RPM; Sequence Valve:25 °; Load Pressure:Phenolic Resin; Weight (approx.):C0; Maximum Permissible Pilot Pressure:Uncoated; Maximum rotational speed:Not for Ball Screws; Drive Speed:8 mm; Nominal Resistance:Double Sealed; Voltage:0.3 mm; Pressurefree Operation:ABEC 9/7 (Non-Critical Features); Maximum angular acceleration:100; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Sequence Valve:12 mm; Rotary stiffness:4.55 kN; Load Pressure:28 mm; Nominal Resistance:2.5 kN; Maximum Permissible Speed (limit Speed):8 mm; Torque:75000 RPM; Weight (approx.):25 °; Drive Power:Phenolic Resin; Rate Of Pressure Change:C0; Maximum Axial Force At Standstill:Uncoated; Maximum Torque:Not for Ball Screws; Displacement, geometric, per revolution:8 mm; Maximum rotational speed:Double Sealed; Maximum angular acceleration:0.3 mm; Flow:ABEC 9/7 (Non-Critical Features); Pressurefree Operation:100; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Drive Speed:12 mm; Sequence Valve:4.55 kN; Torque:28 mm; Control Pressure Measurement:2.5 kN; Case volume:8 mm; Maximum Permissible Pilot Pressure:75000 RPM; Weight (approx.):25 °; Maximum Axial Force At Standstill:Phenolic Resin; Displacement, geometric, per revolution:C0; Flow:Uncoated; Load Pressure:Not for Ball Screws; Rate Of Pressure Change:8 mm; Maximum Permissible Speed (limit Speed):Double Sealed; Maximum rotational speed:0.3 mm; Control Fluid Drain:ABEC 9/7 (Non-Critical Features); Maximum Volume Flow:100; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Case volume:12 mm; Rate Of Pressure Change:4.55 kN; Displacement, geometric, per revolution:28 mm; Determining Operating Characteristics:2.5 kN; Voltage:8 mm; Power:75000 RPM; Drive Power:25 °; Maximum rotational speed:Phenolic Resin; Sequence Valve:C0; Rotary stiffness:Uncoated; Maximum Torque:Not for Ball Screws; Moment of inertia rotary group:8 mm; Maximum Axial Force At Standstill:Double Sealed; Nominal Resistance:0.3 mm; Torque:ABEC 9/7 (Non-Critical Features); Flow:100; |
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Rexroth PVV4-1X/122RA15DMB Vane pump Video