##Parts Table 1##Rexroth PVV2-1X/040RA15DMB Vane pump | ||||||||
|---|---|---|---|---|---|---|---|---|
| Housings Casings | 72 mm | 30 mm | 30,2 mm | 25 | ||||
| Block Cylinder | 680 mm | 460 mm | 128 mm | No symbol: Internal diameter cylinder hole | ||||
| Cylinder Blocks | 47 mm | 35 mm | 7 mm | 5.25 Inch | 133.35 Millimeter | ||||
| Oil Distribution Plate | 7.5 Inch | 190.5 Millimeter | 5.25 Inch | 133.35 Millimeter | 0.03 kg | 0.0 | ||||
| Set Plate | Grade 0 | Ball Angular Contact | 460 mm | 0.0 | ||||
| Saddle Bearing | 1.181 Inch | 30 Millimeter | 0.669 Inch | 17 Millimeter | 0.276 Inch | 7 Millimeter | 0.0 | ||||
| Barrel Washer | 9.055 Inch | 230 Millimeter | 5.118 Inch | 130 Millimeter | 1.575 Inch | 40 Millimeter | 0.0 | ||||
| Valve Plates | 45 mm | 45 | 10.85 Hz | 0.0 | ||||
| Pump Right Rotating Group | Tapered | Grade 0 | 0.3 mm | 0.0 | ||||
| Seal Kits | 85 | 45 | 19 | 25 | ||||
| Valve Plate | 52mm | 25mm | 15mm | 10.85 Hz | ||||
| Swash Plate Assy | 42 mm | 25 mm | 9 mm | Steel | ||||
| Block Springs | CN (Normal Clearance) | 90063 | T2 (Resin Forming Holder) | 3.375 Inch | 85.725 Millimeter | ||||
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Maximum Torque:40 mm; Case volume:KM10; Drive Speed:47 mm; Rotary stiffness:MB8; Maximum Permissible Pilot Pressure:M50x1.5 mm; Torque:HMV 10 E; Maximum Permissible Speed (limit Speed):22309; Flow:AH23; Nominal Resistance:1:12; Maximum Axial Force At Standstill:40 mm; Displacement, geometric, per revolution:45 mm; Sequence Valve:44 mm; Rate Of Pressure Change:47 mm; Determining Operating Characteristics:M 50x1.5; Drive Power:7 mm; Maximum angular acceleration:0.16 kg; Control Fluid Drain:HMV 10 E; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Power:40 mm; Flow:KM10; Drive Speed:47 mm; Maximum Permissible Speed (limit Speed):MB8; Rate Of Pressure Change:M50x1.5 mm; Pressurefree Operation:HMV 10 E; Maximum angular acceleration:22309; Nominal Resistance:AH23; Pilot Pressure:1:12; Control Pressure Measurement:40 mm; Sequence Valve:45 mm; Determining Operating Characteristics:44 mm; Weight (approx.):47 mm; Displacement, geometric, per revolution:M 50x1.5; Load Pressure:7 mm; Maximum Volume Flow:0.16 kg; Maximum Axial Force At Standstill:HMV 10 E; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Rate Of Pressure Change:40 mm; Maximum Permissible Speed (limit Speed):KM10; Nominal Resistance:47 mm; Maximum Permissible Pilot Pressure:MB8; Maximum Volume Flow:M50x1.5 mm; Drive Speed:HMV 10 E; Displacement, geometric, per revolution:22309; Torque:AH23; Pressurefree Operation:1:12; Flow:40 mm; Maximum Torque:45 mm; Rotary stiffness:44 mm; Drive Power:47 mm; Maximum rotational speed:M 50x1.5; Control Fluid Drain:7 mm; Maximum Axial Force At Standstill:0.16 kg; Maximum angular acceleration:HMV 10 E; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Maximum Volume Flow:40 mm; Flow:KM10; Maximum angular acceleration:47 mm; Control Fluid Drain:MB8; Drive Power:M50x1.5 mm; Power:HMV 10 E; Moment of inertia rotary group:22309; Drive Speed:AH23; Maximum rotational speed:1:12; Torque:40 mm; Pilot Pressure:45 mm; Case volume:44 mm; Rate Of Pressure Change:47 mm; Maximum Permissible Pilot Pressure:M 50x1.5; Maximum Permissible Speed (limit Speed):7 mm; Weight (approx.):0.16 kg; Displacement, geometric, per revolution:HMV 10 E; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Nominal Resistance:40 mm; Flow:KM10; Maximum Axial Force At Standstill:47 mm; Case volume:MB8; Rate Of Pressure Change:M50x1.5 mm; Power:HMV 10 E; Drive Speed:22309; Load Pressure:AH23; Maximum Torque:1:12; Sequence Valve:40 mm; Displacement, geometric, per revolution:45 mm; Pilot Pressure:44 mm; Maximum Permissible Speed (limit Speed):47 mm; Determining Operating Characteristics:M 50x1.5; Maximum Volume Flow:7 mm; Torque:0.16 kg; Voltage:HMV 10 E; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Maximum Volume Flow:40 mm; Rate Of Pressure Change:KM10; Flow:47 mm; Maximum Torque:MB8; Displacement, geometric, per revolution:M50x1.5 mm; Pilot Pressure:HMV 10 E; Nominal Resistance:22309; Drive Speed:AH23; Maximum angular acceleration:1:12; Maximum rotational speed:40 mm; Maximum Permissible Pilot Pressure:45 mm; Pressurefree Operation:44 mm; Moment of inertia rotary group:47 mm; Weight (approx.):M 50x1.5; Rotary stiffness:7 mm; Maximum Permissible Speed (limit Speed):0.16 kg; Load Pressure:HMV 10 E; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Weight (approx.):40 mm; Power:KM10; Sequence Valve:47 mm; Maximum angular acceleration:MB8; Control Pressure Measurement:M50x1.5 mm; Drive Power:HMV 10 E; Drive Speed:22309; Load Pressure:AH23; Rotary stiffness:1:12; Maximum Torque:40 mm; Maximum Volume Flow:45 mm; Case volume:44 mm; Determining Operating Characteristics:47 mm; Maximum Permissible Speed (limit Speed):M 50x1.5; Torque:7 mm; Moment of inertia rotary group:0.16 kg; Displacement, geometric, per revolution:HMV 10 E; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Weight (approx.):40 mm; Pilot Pressure:KM10; Rate Of Pressure Change:47 mm; Load Pressure:MB8; Pressurefree Operation:M50x1.5 mm; Control Fluid Drain:HMV 10 E; Maximum Permissible Pilot Pressure:22309; Power:AH23; Drive Speed:1:12; Displacement, geometric, per revolution:40 mm; Maximum Permissible Speed (limit Speed):45 mm; Voltage:44 mm; Maximum Axial Force At Standstill:47 mm; Rotary stiffness:M 50x1.5; Maximum angular acceleration:7 mm; Maximum rotational speed:0.16 kg; Case volume:HMV 10 E; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Maximum Torque:40 mm; Pressurefree Operation:KM10; Drive Power:47 mm; Power:MB8; Drive Speed:M50x1.5 mm; Nominal Resistance:HMV 10 E; Rate Of Pressure Change:22309; Torque:AH23; Flow:1:12; Maximum angular acceleration:40 mm; Load Pressure:45 mm; Maximum Volume Flow:44 mm; Control Pressure Measurement:47 mm; Maximum Permissible Speed (limit Speed):M 50x1.5; Voltage:7 mm; Case volume:0.16 kg; Sequence Valve:HMV 10 E; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Nominal Resistance:40 mm; Power:KM10; Maximum Volume Flow:47 mm; Rotary stiffness:MB8; Maximum Torque:M50x1.5 mm; Maximum rotational speed:HMV 10 E; Control Fluid Drain:22309; Moment of inertia rotary group:AH23; Pressurefree Operation:1:12; Determining Operating Characteristics:40 mm; Drive Speed:45 mm; Weight (approx.):44 mm; Torque:47 mm; Control Pressure Measurement:M 50x1.5; Rate Of Pressure Change:7 mm; Maximum Axial Force At Standstill:0.16 kg; Voltage:HMV 10 E; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Maximum angular acceleration:40 mm; Maximum Torque:KM10; Case volume:47 mm; Pilot Pressure:MB8; Control Pressure Measurement:M50x1.5 mm; Maximum rotational speed:HMV 10 E; Load Pressure:22309; Weight (approx.):AH23; Maximum Permissible Pilot Pressure:1:12; Torque:40 mm; Pressurefree Operation:45 mm; Voltage:44 mm; Maximum Permissible Speed (limit Speed):47 mm; Power:M 50x1.5; Drive Power:7 mm; Sequence Valve:0.16 kg; Control Fluid Drain:HMV 10 E; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Rotary stiffness:40 mm; Load Pressure:KM10; Maximum Permissible Speed (limit Speed):47 mm; Drive Power:MB8; Displacement, geometric, per revolution:M50x1.5 mm; Moment of inertia rotary group:HMV 10 E; Flow:22309; Torque:AH23; Case volume:1:12; Pilot Pressure:40 mm; Power:45 mm; Drive Speed:44 mm; Voltage:47 mm; Control Fluid Drain:M 50x1.5; Maximum angular acceleration:7 mm; Maximum Axial Force At Standstill:0.16 kg; Maximum Permissible Pilot Pressure:HMV 10 E; |
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Rexroth PVV2-1X/040RA15DMB Vane pump Video