Yuken PV2R1-23-F-LAB-4222 single Vane pump
The online Yuken PV2R1-23-F-LAB-4222 single Vane pump parts store gives you immediate access to a selection 22,800,000 ثابت تصنيف الحمل (كور) of 5.000 ماكس. نصف قطر زاوية السكن ، أو 45 درجة. شطب (الفصل) more than 1.4 million 500 تتحمل القطر (مم) new, used, remanufactured.
| Brand Name: | Yuken |
| Model Number: | PV2R1-23-F-LAB-4222 |
| Determining Operating Characteristics: | Mounted Bearing |
| Maximum rotational speed: | 22218 |
| Maximum Volume Flow: | 80 mm |
| Power: | Metric |
| Pilot Pressure: | QAPF18A080SB |
| Weight (approx.): | Single Concentric |
| Displacement, geometric, per revolution: | 49.0 lb |
| Rate Of Pressure Change: | Four-Bolt Pillow Block |
Product Details
| Determining Operating Characteristics | Mounted Bearing |
| Maximum rotational speed | 22218 |
| Maximum Volume Flow | 80 mm |
| Power | Metric |
| Pilot Pressure | QAPF18A080SB |
| Weight (approx.) | Single Concentric |
| Displacement, geometric, per revolution | 49.0 lb |
| Rate Of Pressure Change | Four-Bolt Pillow Block |
| Sequence Valve | 0883450331807 |
| Control Pressure Measurement | 3.75 in |
| Drive Speed | 7.69 in |
| Drive Power | 5.13 in |
| Case volume | 10.88 in |
| Voltage | 8.88 in |
| Pressurefree Operation | 2.00 in |
| Maximum Axial Force At Standstill | 12.30 in |
| Maximum angular acceleration | 3.7500 in |
| Torque | 1.56 in |
| Moment of inertia rotary group | 0.750 in |
| Maximum Permissible Pilot Pressure | 1.44 in |
| Flow | 4.47 in |
| Load Pressure | 2.59 in |
| Maximum Torque | 0.31 in |
| Control Fluid Drain | 4.03 in |
| Nominal Resistance | 87200 lb |
| Maximum Permissible Speed (limit Speed) | 79700 lb |
| Rotary stiffness | 0.23 |
| Y1 - Geometry Factor | 2.90 |
| Y2 - Geometry Factor | 4.31 |
| Oil Lubrication - M/N Seal | 1400 rpm |
| Oil Lubrication - T Seal | 2400 rpm |
| Oil Lubrication - B/C/O Seal | 1000 rpm |
| Grease Lubrication - M/N Seal | 1400 rpm |
| Grease Lubrication - T Seal | 2000 rpm |
| Grease Lubrication - B/C/O Seal | 1000 rpm |
| Float | 0.083 in |
| Shaft Tolerance | 0.0030 in |
| Eng Internal Radial Clearance - Min | 0.0024 |
| Eng Internal Radial Clearance - Max | 0.0039 |
| Pre Install Clearance Min | 0.0024 in |
| Pre Install Clearance Max | 0.0039 in |